logo
Good price  online

products details

Home > Products >
Battery Raw Material
>
1P8S 100Ah Energy Storage CCS FPC Busbar Board 213x147x13mm for 25.6V Battery Modules

1P8S 100Ah Energy Storage CCS FPC Busbar Board 213x147x13mm for 25.6V Battery Modules

Brand Name: XWELL
Model Number: CCS-1P8S-100Ah
MOQ: 10pcs
Price: Negotiable
Packaging Details: Anti-Static Moisture-Proof Inner Bag with Export-Grade Protective Carton
Detail Information
Place of Origin:
Guangdong, China
Model:
CCS-1P8S-100Ah
Cell Configuration:
1P8S, A + B Module Combination
Rated Pack Voltage / Capacity:
25.6V 100Ah
Overall Dimensions:
213 X 147 X 13 Mm
Cell Center Spacing:
53 Mm / 108 Mm
Circuit Construction:
PI FPC + PCB Stiffener, Nickel Tabs, Aluminum Busbars
Lamination Process:
Blister Sheet Or PET Film Hot-press
Busbar (O Temper):
1060 Aluminum, T=1.5 Mm
Busbar (H24 Temper):
1060 Aluminum, T=1.5 Mm, Positive & Negative Electrode Plates
Insulating Carrier:
ABS + PC, UL94 V0 Flame Retardant
Temperature Sensor:
1 Pcs NTC, 10K Ohm +/-1%, B Value 3435
Signal Cable:
XH2.54, 7-pin, 26 AWG, 470 Mm
Circuit Area Thickness:
Approx. 0.34 Mm
Bending Angle:
90 / 180 Degree
Supply Ability:
5000 Sets per Month
Highlight:

1P8S 100Ah CCS Board

,

25.6V FPC Busbar Board

,

Compact CCS FPC Harness

Product Description
1P8S 100Ah Energy Storage CCS Board for 25.6V Compact Battery Modules
 
Product Overview

This 1P8S CCS (cell contact system) is a wire-harness-free current collection and signal acquisition board built for 25.6V 100Ah low-voltage battery modules. A polyimide (PI) flexible circuit is bonded with nickel tabs and conductive aluminum busbars, then laminated with a vacuum-formed blister sheet or PET film. Cell voltage and temperature sensing are routed on the same FPC, so the module harness, connectors and separate sensor wiring are no longer needed.

Model CCS-1P8S-100Ah uses compact outer dimensions of 213 * 147 * 13 mm with cell center spacings of 53 mm and 108 mm, matching 1P8S configurations of 100Ah prismatic cells in an A + B module arrangement. The busbars are 1060 aluminum in O temper with T=1.5 mm, while the positive and negative electrode plates use 1060 aluminum in H24 temper at T=1.5 mm. A single NTC (10KΩ, tolerance ±1%, B value 3435) is provided, and signal output is delivered through an XH2.54 7-pin, 26 AWG, 470 mm flat cable. The carrier is molded in ABS + PC with UL94 V0 flame-retardant rating, and the FPC is locally stiffened by a PCB to keep the connector area flat during plug-in.

Key Features
  • Wire Harness Eliminated: Voltage and temperature channels are integrated on one FPC, removing the traditional wiring loom, cable ties and extra connectors from the module, which shortens pack assembly time and reduces potential failure points
  • 13 mm Slim Profile: With a 13 mm overall height and roughly 0.34 mm circuit thickness, the board fits space-constrained low-voltage packs and contributes to more than 30% weight reduction versus conventional harnesses
  • Free-Form Routing: 90° and 180° bending capability allows the FPC to follow curved and stepped surfaces, accommodating CTP/CTC pack layouts and non-planar module geometry without extra brackets
  • Stable Welding Joints: Ultrasonic welding and hotbar hot-press lamination produce low-resistance, repeatable joints between nickel tabs, aluminum busbars and the flexible circuit, keeping internal resistance consistent across production lots
  • Signal Integrity Under Vibration: Wide operating temperature tolerance, high insulation resistance and vibration-resistant construction keep voltage and NTC readings accurate under continuous charge-discharge cycling and transport shock
  • Modular A + B Assembly: The A + B module combination supports symmetric left/right placement inside the pack, simplifying spare-part planning and field replacement
Specifications
Model CCS-1P8S-100Ah
Cell Configuration 1P8S, A + B module combination
Rated Pack Voltage / Capacity 25.6V 100Ah (B, CY G1)
Overall Dimensions 213 * 147 * 13 mm
Cell Center Spacing 53 mm / 108 mm
Circuit Construction PI flexible circuit (FPC) + PCB stiffener, nickel tabs, conductive aluminum busbars
Lamination Process Blister (vacuum-formed) sheet or PET film hot-press
Busbar, O Temper 1060 aluminum, T=1.5 mm
Busbar, H24 Temper 1060 aluminum, T=1.5 mm, positive / negative electrode plates
Insulating Carrier ABS + PC, UL94 V0 flame retardant
Temperature Sensor 1 pcs NTC, 10KΩ ±1%, B value 3435
Signal Cable XH2.54, 7-pin, 26 AWG, 470 mm
Circuit Area Thickness Approx. 0.34 mm
Bending Angle 90° / 180°
Applications
  • 25.6V 100Ah low-voltage battery modules for residential and small commercial energy storage
  • 1P8S prismatic cell packs in A + B module layout
  • Wall-mounted and stacked home storage cabinets with tight internal clearance
  • Telecom backup and small UPS battery packs requiring compact sensing solutions
  • Retrofit projects replacing aging wire harnesses in existing module designs
  • Custom packs with curved, stepped or irregular module geometry
Why Choose Us
  • Lower Cost per Pack: Direct factory manufacturing and one-piece integration replace a multi-part harness assembly, cutting material count and assembly labor cost on every 1P8S module.
  • Fast Sampling Cycle: Drawing confirmation and prototype samples for new 1P8S layouts are typically completed within one week, so your pack design schedule is not delayed.
  • Layout Co-Design Support: Our engineers work from your cell spacing, module outline and BMS pin definition to optimize FPC routing, busbar width and NTC placement before tooling is released.
  • Low Tooling for Variants: Because the FPC artwork carries the routing, derivative lengths and special-shaped versions can be introduced with minimal additional tooling investment.
  • Export-Grade Packing and Delivery: 5-8 working days lead time with anti-static, moisture-proof inner packaging and protective cartons for international shipments.