6KW Ultrasonic Battery Welder For Copper Wire 0.7Mpa Gas Source

Product Description

Ultrasonic Copper Aluminum Metal Wire Harness Spot Welding Machine For Cable Terminal Battery Solar Splicing Welding

20KHz 2KW 3KW Ultrasonic Copper Wire Harness Spot Welding Machine for metal cable Soldering assembling is a Sonic metal welding which is the use of high-frequency vibration wave to the two metal surface to be welded, in the case of pressure, so that the two metal surfaces friction between the formation of molecular layer between the fusion, the advantage is fast, energy saving, fusion High strength, good conductivity, no spark, close to the cold state processing; the disadvantage is that the welding of metal parts can not be too thick (generally less than or equal to 5mm), the solder bit can not be too large, need pressure.

Welding advantages

1. welding materials are not melting, not fragile metal characteristics.

2. after welding good conductivity, resistance coefficient is very low or almost zero.

3. the welding metal surface requirements are low, oxidation or plating can be welded.

4. welding time is short, without any flux, gas, solder.

5.  welding without spark, environmental safety.

Ultrasonic metal welding machine Applicable products

1. nickel-metal hydride batteries Ni-MH battery nickel mesh and nickel-chip mutual melting and nickel film mutual melting. The

2. lithium batteries, polymer batteries and nickel foil copper foil mutual melting, aluminum foil and aluminum mutual melting.

3. wire mutual melting, partial knot with a number of mutual melting.

4. wire and the name of electronic components, contacts, connectors melting each other.

5. the name of household appliances, automotive supplies of large heat sink, heat exchange fins, honeycomb heart of the mutual melting.

6. electromagnetic switch, no fuse switch and other high current contacts, dissimilar metal sheet of mutual melting.

7. the metal pipe of the tail, cut off water, airtight.

Main Specifications